The release bearing is installed on the wave fork of the gearbox, which can be seen when the gearbox is lifted down. Installation method of release bearing:
1. When removing the gearbox, the rocker arm on the clutch release fork shaft shall be removed, and the pressing plate of the release bearing can be clamped with the rocker arm during installation;
2. The clutch release bearing is installed between the clutch and the transmission, and the loose sleeve in the release housing is in the tubular extension of the first shaft bearing cover of the transmission;
3. The shoulder release bearing is always against the release fork through the return spring, and returns to the final position. The release lever end (release finger) keeps the clearance at about 3~4mm.