Remove the wave box assembly with professional wave box jack. The wave box assembly is heavy. It is better for two workers to work together and pay attention to preventing falling and injuring people at the height of the wave box.

Removal of five manual wave box assembly, domestic manual wave box, quality is acceptable.

Seal the position of half-axle oil seal with butter to prevent oil leakage from wave box. Check gear oil quantity after installing compound wave box. If there is lack of wave box oil, it must be added to standard quantity.

Fork pulling and separation assembly, fork pulling to check whether wear is normal, whether bending. Separation bearings should be checked for loose rotation and abnormal noise.

Axis and fork-pulling seat of wave box.

The fork pulling assembly, when installing the fork pulling, adds butter lubrication to the fork seat to improve flexibility.

Clutch plate and pressure plate assembly.

Installation of clutch and platen should pay attention to the installation in place. Experienced teachers will adopt the method of three-point-one-line to install. The so-called three-point-one-line is the center point of platen ring and the center point of clutch plate, the center point of one axis, and the three center points can be consistent to install the wave box assembly.

Copyright © 2013 TAIZHOU HONGHUI MACHINERY CO.,LTD
TEL:0576-87138327 89906183
FAX:0576-87138307 89906181
Technical Support:censt